Canon Printers are one of the best printer brands on the market, producing versatile and high-quality printing services. Because of its ease of use and setup, the Canon Pixma MG3600 is the most preferred, dependable, and trustworthy printer. Install canon printer mg3600 and connect the wireless printer, then begin printing with it. Learn how to proceed with the Canon Pixma MG3600 Wireless Setup, then read this article to learn everything you need to know about it. Begin by connecting all of the wires according to the printer manual’s instructions. WPS is an automatic connection button that allows you to connect your devices. This will allow devices such as printers and computers to connect to your network without the need for a password.
How to Install and Setup the Canon Pixma MG3600 Wireless Printer
Check that the printer’s LAN is not broken. Insert one end into the printer and the other into the router port. Furthermore, the steps for Canon Pixma MG3600 Wireless Setup to a Wi-Fi network are listed below. Install Canon Pixma MG3600 with USB Cable You simply need to follow the instructions below carefully to set up the connection:
- Turn on your Canon Pixma MG3600 printer and a compatible laptop or computer.
- Using a USB cable, connect your Canon pixma mg3600 printer to your device.
- After that, go to the Canon pixma mg3600 official website and download and install it.
- Select the wired connection mode.
- Complete the process by following the instructions displayed.
- It is strongly advised that you do not disconnect your printer from your operating system until the process is complete.
How to Setup Canon PIXMA Printer MG3600
The Canon MG3600 is a very dependable printer for printing, scanning, faxing, and copying. With the Canon MG3600 wireless setup, you can print documents from small devices such as a smartphone. So, use the amazing wireless capabilities to print and scan from anywhere you want. If you’ve already purchased the Canon printer, let’s get started on the Canon MG3600 wireless setup.
Method 1: WPS Connection
If your access point has a WPS button, select “WPS connection method” without hesitation because this is the simplest way to complete the setup of a Canon mg3600 Wi-Fi connection. Examine the highlighted lines and follow the same instructions:
- First, ensure that the printer is turned on and that the WPS button on the wireless router is accessible.
- Now, press and hold the Wi-Fi button on the printer until the on light flashes.
- Press the “Black” button first, followed by the “Wi-Fi” button.
- Check that the Wi-Fi indicator is flashing and the ON indicator is turned on. Then, within minutes, go to your hotspot and press the WPS button.
- Following that, the printer’s blue Wi-Fi light will blink while searching, and both the power and Wi-Fi lights will blink when connected to the access point. After successfully connecting to your wireless network, the power and Wi-Fi lights stop blinking and remain illuminated.
- Finally, ensure that both the Wi-Fi and the ON lights are turned on.
- After completing the preceding steps, the network connection configuration is complete. If your device is still not connected, move on to the next method to finish the Canon mg3600 setup.
Method 2: Conventional Connection Method
If your access point does not support WPS, use the steps below to configure your printer on your wireless network:
- When the first screen appears, select “Start Configuration.”
- The software will now check the driver to see if it needs to be updated. If an update is required, it will be downloaded automatically. wait a few moments
- Choose your region and country, then press the “Next” button.
- If you accept the licence agreement’s terms and conditions, click “Yes.”
- Click “I accept” if you want to participate in the extended survey programme; otherwise, click “Do not accept.”
- To authorise all “Setup Wizard processes,” click “Next.”
- Choose “Wireless LAN Connection,” then click “Next.”
- Click “Next” after selecting “Connect via a wireless router.”
- Check that your printer is turned on, then click “Next.”
- Select “Printer settings are not found in the list,” then click “Next.”
- The installation guide will appear; all you have to do is carefully follow the on-screen instructions.
- When the installer detects the printer, wait a minute.
- When the configuration is finished, click “Next” and then “Exit.”
Setup Canon PIXMA MG3600 Wireless Printer on MAC
Here’s how to Reset Canon MG3600 Wi-Fi Network on Mac OS:
- To begin, ensure that your router has a WPS button.
- Check that the network is using the WPA or WPA2 security protocol.
- Turn on your Canon MG3600 printer after confirmation.
- Hold down the “Wi-Fi” button until the alarm lamp blinks.
- Check that the Wi-Fi lamp is flashing blue. At this point, go to the router and press the “WPS” button.
- Continue to hold the button for a few minutes, or the connection may be lost.
- If the Wi-Fi light blinks, the printer is looking for available router networks.
- When the printer has finished looking for a wireless router, both the power and Wi-Fi lights blink.
- The power and Wi-Fi lamps will stop blinking once the printer is properly connected to a router. The light will stabilise.
- Now, go to the official Canon website and download and install your printer driver.
- Finally, once the driver setup installation is complete, your printer will be ready to provide you with high-quality printouts.
Following the steps below, I hope you can now set up the Canon printer mg3600 printer. After you’ve completed all of these steps, you should be able to connect your Canon MG3600 printer to your computer or wifi. You should be able to successfully print with your printer. However, if you still have problems with Printer Setup after following all of the steps, you can contact Canon’s advanced printer setup experts. These master experts are available throughout the day to answer all of your questions and concerns. You can contact them at any time and from any location in the world to get answers to your printer questions.
References: canon mg3600 printer setup